Products

About Mobil 600W Super Cylinder Oil

Mobil Cylinder oils are extra high performance high viscosity oils. They are designed for use in enclosed worm gears operating at moderate to high speeds and temperatures; where heavy loads, slow speeds or high temperatures demand high viscosity oils. They are also suitable for all steam engine applications. They are formulated from high quality base stocks that are resistant to oxidation and thermal degradation and the build-up of harmful deposits caused by the high operating temperatures of steam cylinders. They protect against rust and corrosion, provide good film strength and excellent lubricity and are resistant to water washout.

Advantages and Potential Benefits:

• Excellent protection of gears and bearings at high temperatures and heavy loads for optimum performance
• Extended gear service intervals reduce maintenance costs
• Optimum system efficiency and fewer unplanned stoppages

Applications:

• Splash lubrication of enclosed worm gears operating at moderate to high speeds and temperatures
• Steam cylinders, couplings, bearings, and break-in of compressor cylinders
• Recommended for the above applications but under higher temperature and load conditions

About Mobil Glygoyle 150

Mobil Glygoyle lubricants are supreme performance oils for gears, bearings and compressors, designed to provide outstanding efficiency, equipment protection and oil life. These fully synthetic, polyalkylene glycol (PAG) lubricants were developed to operate beyond the capabilities of other synthetic lubricants and mineral oils. Their low pour points ensure excellent low temperature fluidity. The ISO 150 to 1000 grades are approved for USDA/NSF H-1 food-grade use.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Extended equipment service intervals reduces maintenance costs
• Reliable flow and lubrication for easy startup, even at low temperatures, especially important for successful operation of remotely located equipment
• Excellent protection of gears, even under heavy loads

Applications:

• Filled for life gearboxes, especially high-ratio/low-efficiency worm gears
• All worm gear applications such as those used in conveyers, escalators, material handling, press drives, packaging machinery, ski lifts, agitators and mixers
• Other gear and bearing applications in the cement, metalworking, plastics, food and textile finishing industries
• Plastic calendars
• Gas compression utilising reciprocation, rotary, screw, and centrifugal type compressors

About Mobil Glygoyle 220

Mobil Glygoyle lubricants are supreme performance oils for gears, bearings and compressors, designed to provide outstanding efficiency, equipment protection and oil life. These fully synthetic, polyalkylene glycol (PAG) lubricants were developed to operate beyond the capabilities of other synthetic lubricants and mineral oils. Their low pour points ensure excellent low temperature fluidity. The ISO 150 to 1000 grades are approved for USDA/NSF H-1 food-grade use.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Extended equipment service intervals reduces maintenance costs
• Reliable flow and lubrication for easy startup, even at low temperatures, especially important for successful operation of remotely located equipment
• Excellent protection of gears, even under heavy loads

Applications:

• Filled for life gearboxes, especially high-ratio/low-efficiency worm gears
• All worm gear applications such as those used in conveyers, escalators, material handling, press drives, packaging machinery, ski lifts, agitators and mixers
• Other gear and bearing applications in the cement, metalworking, plastics, food and textile finishing industries
• Plastic calendars
• Gas compression utilising reciprocation, rotary, screw, and centrifugal type compressors

About Mobil Glygoyle 320

Mobil Glygoyle lubricants are supreme performance oils for gears, bearings and compressors, designed to provide outstanding efficiency, equipment protection and oil life. These fully synthetic, polyalkylene glycol (PAG) lubricants were developed to operate beyond the capabilities of other synthetic lubricants and mineral oils. Their low pour points ensure excellent low temperature fluidity. The ISO 150 to 1000 grades are approved for USDA/NSF H-1 food-grade use.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Extended equipment service intervals reduces maintenance costs
• Reliable flow and lubrication for easy startup, even at low temperatures, especially important for successful operation of remotely located equipment
• Excellent protection of gears, even under heavy loads

Applications:

• Filled for life gearboxes, especially high-ratio/low-efficiency worm gears
• All worm gear applications such as those used in conveyers, escalators, material handling, press drives, packaging machinery, ski lifts, agitators and mixers
• Other gear and bearing applications in the cement, metalworking, plastics, food and textile finishing industries
• Plastic calendars
• Gas compression utilising reciprocation, rotary, screw, and centrifugal type compressors

About Mobil Glygoyle 460

Mobil Glygoyle lubricants are supreme performance oils for gears, bearings and compressors, designed to provide outstanding efficiency, equipment protection and oil life. These fully synthetic, polyalkylene glycol (PAG) lubricants were developed to operate beyond the capabilities of other synthetic lubricants and mineral oils. Their low pour points ensure excellent low temperature fluidity. The ISO 150 to 1000 grades are approved for USDA/NSF H-1 food-grade use.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Extended equipment service intervals reduces maintenance costs
• Reliable flow and lubrication for easy startup, even at low temperatures, especially important for successful operation of remotely located equipment
• Excellent protection of gears, even under heavy loads

Applications:

• Filled for life gearboxes, especially high-ratio/low-efficiency worm gears
• All worm gear applications such as those used in conveyers, escalators, material handling, press drives, packaging machinery, ski lifts, agitators and mixers
• Other gear and bearing applications in the cement, metalworking, plastics, food and textile finishing industries
• Plastic calendars
• Gas compression utilising reciprocation, rotary, screw, and centrifugal type compressors

About Mobil Glygoyle 680

Mobil Glygoyle lubricants are supreme performance oils for gears, bearings and compressors, designed to provide outstanding efficiency, equipment protection and oil life. These fully synthetic, polyalkylene glycol (PAG) lubricants were developed to operate beyond the capabilities of other synthetic lubricants and mineral oils. Their low pour points ensure excellent low temperature fluidity. The ISO 150 to 1000 grades are approved for USDA/NSF H-1 food-grade use.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Extended equipment service intervals reduces maintenance costs
• Reliable flow and lubrication for easy startup, even at low temperatures, especially important for successful operation of remotely located equipment
• Excellent protection of gears, even under heavy loads

Applications:

• Filled for life gearboxes, especially high-ratio/low-efficiency worm gears
• All worm gear applications such as those used in conveyers, escalators, material handling, press drives, packaging machinery, ski lifts, agitators and mixers
• Other gear and bearing applications in the cement, metalworking, plastics, food and textile finishing industries
• Plastic calendars
• Gas compression utilising reciprocation, rotary, screw, and centrifugal type compressors

About Mobil SHC Gear 1000

Mobil SHC Gear Series is a line of supreme performance, fully synthetic industrial gear oils designed to provide outstanding protection of gears and bearings, extended oil life even under extreme conditions, helping to enable problem-free operation of equipment and increased customer productivity. Mobil SHC Gear Series lubricants contain an advanced proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing as well as a high level of resistance against micropitting fatigue. In addition, compared to conventional gear oil chemistries, it offers the potential for improved lubrication of gearbox rolling element bearings

Advantages and Potential Benefits:

To address the issue of micropitting wear, our formulation scientists used a combination of additives which would resist traditional gear wear mechanisms as well as protecting against micropitting. Mobil SHC Gear product provide exceptional oil life and deposit control and resistance to thermal/oxidative and chemical degradation, as well as the balance of the performance features.

1. Superb protection from micropitting fatigue wear as well as high resistance to traditional scuffing wear
2. Excellent resistance to degradation at high temperatures
3. Reduced fluid friction produces lower operating temperatures and improved gear efficiency
4. High viscosity index equating to reduced viscosity change with temperature
5. Excellent resistance to rust and corrosion and very good demulsibility
6. Excellent shear stability
7. No filter plugging, even in the presence of water
8. Excellent seal compatibility
9. Excellent compatibility with common gearbox materials and with mineral-based gear oils

Applications:

Application considerations: While the Mobil SHC Gear Series are compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobil SHC Gear Series, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefit.

Mobil SHC Gear lubricants are recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. They are especially recommended for applications that may be subject to micropitting: especially heavily loaded gearboxes with surface-hardened tooth metallurgies. It may also be used in gear applications where extreme low and/or high temperatures are encountered and applications where corrosion may be severe.

About Mobil SHC Gear 150

Mobil SHC Gear Series is a line of supreme performance, fully synthetic industrial gear oils designed to provide outstanding protection of gears and bearings, extended oil life even under extreme conditions, helping to enable problem-free operation of equipment and increased customer productivity. Mobil SHC Gear Series lubricants contain an advanced proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing as well as a high level of resistance against micropitting fatigue. In addition, compared to conventional gear oil chemistries, it offers the potential for improved lubrication of gearbox rolling element bearings

Advantages and Potential Benefits:

To address the issue of micropitting wear, our formulation scientists used a combination of additives which would resist traditional gear wear mechanisms as well as protecting against micropitting. Mobil SHC Gear product provide exceptional oil life and deposit control and resistance to thermal/oxidative and chemical degradation, as well as the balance of the performance features.

1. Superb protection from micropitting fatigue wear as well as high resistance to traditional scuffing wear
2. Excellent resistance to degradation at high temperatures
3. Reduced fluid friction produces lower operating temperatures and improved gear efficiency
4. High viscosity index equating to reduced viscosity change with temperature
5. Excellent resistance to rust and corrosion and very good demulsibility
6. Excellent shear stability
7. No filter plugging, even in the presence of water
8. Excellent seal compatibility
9. Excellent compatibility with common gearbox materials and with mineral-based gear oils

Applications:

Application considerations: While the Mobil SHC Gear Series are compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobil SHC Gear Series, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefit.

Mobil SHC Gear lubricants are recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. They are especially recommended for applications that may be subject to micropitting: especially heavily loaded gearboxes with surface-hardened tooth metallurgies. It may also be used in gear applications where extreme low and/or high temperatures are encountered and applications where corrosion may be severe.

About Mobil SHC Gear 1500

The Mobil SHC Gear 1500 lubricants are supreme performance heavy-duty gear oils primarily designed for all kinds of enclosed gearing as well as plain and rolling element bearings. They are designed to provide outstanding service in terms of equipment protection, oil life, and problem-free operation enabling increased customer productivity. The synthetic base stocks have inherently low traction properties that result in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling element bearings. Reduced fluid friction produces lower operating temperatures and improved gear efficiency.

The Mobil SHC Gear 1500 finds application in a wide range of enclosed gear applications, as well as plain and rolling element bearings. Because of the very high viscosities they can meet the lubrication needs of very slow speed and high load/high temperature gears and bearings; they are ideal for situations in which conventional products operate in the boundary regime. There may be situations where a lubricant bath or recirculation system is used to apply the oil.

Advantages and Potential Benefits:

The Mobil SHC Gear 1500 is a leading member of the Mobil SHC brand of products that are world renowned for their innovation and performance. The Mobil SHC 1500 provides benefits not possible with mineral stocks, particularly under extreme high and low temperature operating conditions, and deliver performance features and customer benefits.

1. Outstanding load-carrying and anti-wear properties
2. Very high viscosity grades available, without reduction of properties or performance capability
3. High viscosity index
4. Low traction properties
5. Outstanding thermal/oxidation resistance and long product life
6. Light colour

Applications:

Application Considerations: Mobil SHC Gear 1500oil is recommended for all types of enclosed steel-on-steel gear drives. It is suitable for both circulation and splash lubrication systems. It is particularly recommended for gear sets operating under heavy or shock loads and low speeds where boundary lubrication may prevail.

Mobil SHC Gear 1500 – Industrial enclosed spur, helical and bevel gears, especially slow speed, and/or high load unitsMobil SHC Gear 1500 – Plain and rolling element bearings, especially in slow speed, and/or high applications

About Mobil SHC Gear 220

Mobil SHC Gear Series is a line of supreme performance, fully synthetic industrial gear oils designed to provide outstanding protection of gears and bearings, extended oil life even under extreme conditions, helping to enable problem-free operation of equipment and increased customer productivity. Mobil SHC Gear Series lubricants contain an advanced proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing as well as a high level of resistance against micropitting fatigue. In addition, compared to conventional gear oil chemistries, it offers the potential for improved lubrication of gearbox rolling element bearings

Advantages and Potential Benefits:

To address the issue of micropitting wear, our formulation scientists used a combination of additives which would resist traditional gear wear mechanisms as well as protecting against micropitting. Mobil SHC Gear product provide exceptional oil life and deposit control and resistance to thermal/oxidative and chemical degradation, as well as the balance of the performance features.

1. Superb protection from micropitting fatigue wear as well as high resistance to traditional scuffing wear
2. Excellent resistance to degradation at high temperatures
3. Reduced fluid friction produces lower operating temperatures and improved gear efficiency
4. High viscosity index equating to reduced viscosity change with temperature
5. Excellent resistance to rust and corrosion and very good demulsibility
6. Excellent shear stability
7. No filter plugging, even in the presence of water
8. Excellent seal compatibility
9. Excellent compatibility with common gearbox materials and with mineral-based gear oils

Applications:

Application considerations: While the Mobil SHC Gear Series are compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobil SHC Gear Series, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefit.

Mobil SHC Gear lubricants are recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. They are especially recommended for applications that may be subject to micropitting: especially heavily loaded gearboxes with surface-hardened tooth metallurgies. It may also be used in gear applications where extreme low and/or high temperatures are encountered and applications where corrosion may be severe.

About Mobil SHC Gear 22M

Mobil SHC Gear 22M is a supreme performance ultra high viscosity synthetic lubricants designed specifically for use in heavily loaded, low speed open gears where boundary lubrication conditions often prevail. It is formulated from synthetic base stock, which has remarkable low-temperature fluidity, even at such a high viscosity grade. This ultra high viscosity product can be pumped over relatively long distances and use standard spray application equipment. The combination of a naturally high viscosity index and a unique additive system gives the product exceptional thermal/oxidative properties and provides outstanding performance under severe high and low temperature operating conditions even with very slow moving gears. The additive formulation also provides excellent gear scuffing protection, anti-wear performance and rust and corrosion inhibition.

Mobil SHC Gear 22M exceed Falk Corporation's minimum viscosity requirements for intermittent lubrication of gears - winter and summer grades. This grade also meets the viscosity requirements for AGMA lubricant number 14R although it is not a residual lubricant, but a leading edge synthetic product. Mobil SHC Gear 22M does not contain any solvent or any asphaltic-type base oil.

Advantages and Potential Benefits:

Mobil SHC Gear 22M provides the benefits not possible with mineral stock, particularly under extreme high and low temperature operating conditions, and delivers performance features and customer benefits. This ultra high viscosity product is particularly effective in low-speed, high load, high temperature situations and provides excellent gear and bearing protection, longer oil life and excellent all-round service compared with conventional products.

1. Thick EHL fluid film formation and selected additives provide outstanding load-carrying, anti-wear and tackiness properties
2. Excellent pump-ability at ambient temperatures
3. Uses existing lubricant spray equipment
4. Lower application rates than greases, less waste compared to asphalt/solvent products
5. Light coloured product

Applications:

1. Mobil SHC Gear 22M is designed specifically for use in heavy loaded, low speed open gearing which drive stationary rotating machinery. Product is typically applied by intermittent spray nozzle systems
2. Kilns and mills in metal mining, cement and limestone production and sugar plants
3. Slow speed, heavily loaded plain and rolling contact bearings

About Mobil SHC Gear 320

Mobil SHC Gear Series is a line of supreme performance, fully synthetic industrial gear oils designed to provide outstanding protection of gears and bearings, extended oil life even under extreme conditions, helping to enable problem-free operation of equipment and increased customer productivity. Mobil SHC Gear Series lubricants contain an advanced proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing as well as a high level of resistance against micropitting fatigue. In addition, compared to conventional gear oil chemistries, it offers the potential for improved lubrication of gearbox rolling element bearings

Advantages and Potential Benefits:

To address the issue of micropitting wear, our formulation scientists used a combination of additives which would resist traditional gear wear mechanisms as well as protecting against micropitting. Mobil SHC Gear product provide exceptional oil life and deposit control and resistance to thermal/oxidative and chemical degradation, as well as the balance of the performance features.

1. Superb protection from micropitting fatigue wear as well as high resistance to traditional scuffing wear
2. Excellent resistance to degradation at high temperatures
3. Reduced fluid friction produces lower operating temperatures and improved gear efficiency
4. High viscosity index equating to reduced viscosity change with temperature
5. Excellent resistance to rust and corrosion and very good demulsibility
6. Excellent shear stability
7. No filter plugging, even in the presence of water
8. Excellent seal compatibility
9. Excellent compatibility with common gearbox materials and with mineral-based gear oils

Applications:

Application considerations: While the Mobil SHC Gear Series are compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobil SHC Gear Series, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefit.

Mobil SHC Gear lubricants are recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. They are especially recommended for applications that may be subject to micropitting: especially heavily loaded gearboxes with surface-hardened tooth metallurgies. It may also be used in gear applications where extreme low and/or high temperatures are encountered and applications where corrosion may be severe.

About Mobil SHC Gear 3200

The Mobil SHC Gear 3200 lubricants are supreme performance heavy-duty gear oils primarily designed for all kinds of enclosed gearing as well as plain and rolling element bearings. They are designed to provide outstanding service in terms of equipment protection, oil life, and problem-free operation enabling increased customer productivity. The synthetic base stocks have inherently low traction properties that result in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling element bearings. Reduced fluid friction produces lower operating temperatures and improved gear efficiency.

The Mobil SHC Gear 3200 finds application in a wide range of enclosed gear applications, as well as plain and rolling element bearings. Because of the very high viscosities they can meet the lubrication needs of very slow speed and high load/high temperature gears and bearings; they are ideal for situations in which conventional products operate in the boundary regime. There may be situations where a lubricant bath or recirculation system is used to apply the oil.

Advantages and Potential Benefits:

The Mobil SHC Gear 3200 is a leading member of the Mobil SHC brand of products that are world renowned for their innovation and performance. The Mobil SHC 3200 provides benefits not possible with mineral stocks, particularly under extreme high and low temperature operating conditions, and deliver performance features and customer benefits.

1. Outstanding load-carrying and anti-wear properties
2. Very high viscosity grades available, without reduction of properties or performance capability
3. High viscosity index
4. Low traction properties
5. Outstanding thermal/oxidation resistance and long product life
6. Light colour

Applications:

Application Considerations: Mobil SHC Gear 3200 oil is recommended for all types of enclosed steel-on-steel gear drives. It is suitable for both circulation and splash lubrication systems. It is particularly recommended for gear sets operating under heavy or shock loads and low speeds where boundary lubrication may prevail.

Mobil SHC Gear 3200 – Industrial enclosed spur, helical and bevel gears, especially slow speed, and/or high load unitsMobil SHC Gear 3200 – Plain and rolling element bearings, especially in slow speed, and/or high applicationsMobil SHC Gear 3200 – Railroad DC Traction Motor drivesMobil SHC Gear 3200 – Certain open gear applications such as oiling pinions or specially designed circulation systems

About Mobil SHC Gear 460

Mobil SHC Gear Series is a line of supreme performance, fully synthetic industrial gear oils designed to provide outstanding protection of gears and bearings, extended oil life even under extreme conditions, helping to enable problem-free operation of equipment and increased customer productivity. Mobil SHC Gear Series lubricants contain an advanced proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing as well as a high level of resistance against micropitting fatigue. In addition, compared to conventional gear oil chemistries, it offers the potential for improved lubrication of gearbox rolling element bearings

Advantages and Potential Benefits:

To address the issue of micropitting wear, our formulation scientists used a combination of additives which would resist traditional gear wear mechanisms as well as protecting against micropitting. Mobil SHC Gear product provide exceptional oil life and deposit control and resistance to thermal/oxidative and chemical degradation, as well as the balance of the performance features.

1. Superb protection from micropitting fatigue wear as well as high resistance to traditional scuffing wear
2. Excellent resistance to degradation at high temperatures
3. Reduced fluid friction produces lower operating temperatures and improved gear efficiency
4. High viscosity index equating to reduced viscosity change with temperature
5. Excellent resistance to rust and corrosion and very good demulsibility
6. Excellent shear stability
7. No filter plugging, even in the presence of water
8. Excellent seal compatibility
9. Excellent compatibility with common gearbox materials and with mineral-based gear oils

Applications:

Application considerations: While the Mobil SHC Gear Series are compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobil SHC Gear Series, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefit.

Mobil SHC Gear lubricants are recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. They are especially recommended for applications that may be subject to micropitting: especially heavily loaded gearboxes with surface-hardened tooth metallurgies. It may also be used in gear applications where extreme low and/or high temperatures are encountered and applications where corrosion may be severe.

About Mobil SHC Gear 46M

Mobil SHC Gear 46M is a supreme performance ultra high viscosity synthetic lubricants designed specifically for use in heavily loaded, low speed open gears where boundary lubrication conditions often prevail. It is formulated from synthetic base stock, which has remarkable low-temperature fluidity, even at such a high viscosity grade. This ultra high viscosity product can be pumped over relatively long distances and use standard spray application equipment. The combination of a naturally high viscosity index and a unique additive system gives the product exceptional thermal/oxidative properties and provides outstanding performance under severe high and low temperature operating conditions even with very slow moving gears. The additive formulation also provides excellent gear scuffing protection, anti-wear performance and rust and corrosion inhibition.

Mobil SHC Gear 46M exceed Falk Corporation's minimum viscosity requirements for intermittent lubrication of gears - winter and summer grades. This grade also meets the viscosity requirements for AGMA lubricant number 15R although it is not a residual lubricant, but a leading edge synthetic product. Mobil SHC Gear 46M does not contain any solvent or any asphaltic-type base oil.

Advantages and Potential Benefits:

Mobil SHC Gear 46M provides the benefits not possible with mineral stock, particularly under extreme high and low temperature operating conditions, and delivers performance features and customer benefits. This ultra high viscosity product is particularly effective in low-speed, high load, high temperature situations and provides excellent gear and bearing protection, longer oil life and excellent all-round service compared with conventional products.

1. Thick EHL fluid film formation and selected additives provide outstanding load-carrying, anti-wear and tackiness properties
2. Excellent pump-ability at ambient temperatures
3. Uses existing lubricant spray equipment
4. Lower application rates than greases, less waste compared to asphalt/solvent products
5. Light coloured product

Applications:

1. Mobil SHC Gear 46M is designed specifically for use in heavy loaded, low speed open gearing which drive stationary rotating machinery. Product is typically applied by intermittent spray nozzle systems
2. Kilns and mills in metal mining, cement and limestone production and sugar plants
3. Slow speed, heavily loaded plain and rolling contact bearings

About Mobil Gear SHC 680

Mobil SHC Gear Series is a line of supreme performance, fully synthetic industrial gear oils designed to provide outstanding protection of gears and bearings, extended oil life even under extreme conditions, helping to enable problem-free operation of equipment and increased customer productivity. Mobil SHC Gear Series lubricants contain an advanced proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing as well as a high level of resistance against micropitting fatigue. In addition, compared to conventional gear oil chemistries, it offers the potential for improved lubrication of gearbox rolling element bearings

Advantages and Potential Benefits:

To address the issue of micropitting wear, our formulation scientists used a combination of additives which would resist traditional gear wear mechanisms as well as protecting against micropitting. Mobil SHC Gear product provide exceptional oil life and deposit control and resistance to thermal/oxidative and chemical degradation, as well as the balance of the performance features.

1. Superb protection from micropitting fatigue wear as well as high resistance to traditional scuffing wear
2. Excellent resistance to degradation at high temperatures
3. Reduced fluid friction produces lower operating temperatures and improved gear efficiency
4. High viscosity index equating to reduced viscosity change with temperature
5. Excellent resistance to rust and corrosion and very good demulsibility
6. Excellent shear stability
7. No filter plugging, even in the presence of water
8. Excellent seal compatibility
9. Excellent compatibility with common gearbox materials and with mineral-based gear oils

Applications:

Application considerations: While the Mobil SHC Gear Series are compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobil SHC Gear Series, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefit.

Mobil SHC Gear lubricants are recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. They are especially recommended for applications that may be subject to micropitting: especially heavily loaded gearboxes with surface-hardened tooth metallurgies. It may also be used in gear applications where extreme low and/or high temperatures are encountered and applications where corrosion may be severe.

About Mobil SHC Gear 680OH

The Mobil SHC Gear 680OH Series lubricants are supreme performance heavy-duty gear oils primarily designed to lubricate enclosed gearing as well as plain and rolling element bearings in off-highway equipment subject to shock and heavy loading. Mobil SHC Gear 680OH is designed to provide outstanding service in terms of equipment protection, oil life, and problem-free operation helping to enable increased customer productivity. This scientifically engineered synthetic lubricant is formulated from synthetic base fluids that have exceptional oxidation and thermal properties and excellent low temperature fluidity. The combination of a naturally high viscosity index and a unique additive system enables this product to provide outstanding performance under severe high and low temperature operating conditions. The nature of the synthetic base fluids also contributes to the products excellent low temperature performance. Mobil SHC Gear 680OH delivers outstanding gear scuffing protection in heavily loaded gearboxes. The synthetic base stocks have inherently low traction properties that result in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling element bearings. Reduced fluid friction produces lower operating temperatures and improved gear efficiency.

Advantages and Potential Benefits:

Mobil SHC Gear 680OH is a member of the Mobil SHC brand of products that are world-renowned for their innovation and performance. Mobil SHC Gear 680OH provides benefits not possible with mineral stocks, particularly under extreme high and low temperature operating conditions.

1. Outstanding load-carrying and anti-wear properties
2. High viscosity index
3. Low traction properties
4. Outstanding thermal/oxidation resistance and long product life
5. Light colour

Applications:

Mobil SHC Gear 680OH is recommended for all types of enclosed steel-on-steel gear drives. Mobil SHC Gear 680OH is suitable for both circulation and splash lubrication systems. Mobil SHC Gear 680OH is available in an ISO VG 680, providing the right lubrication option for low temperature applications where pour points of -39C are required, to high temperature applications where operating temperature of 121C are encountered. Mobil SHC Gear 680OH is particularly recommended for lubricating gear sets in off-highway applications such as those found in mining, where heavy or shock loads and boundary lubrication conditions may prevail.

About Mobil SHC Gear 6800

The Mobil SHC Gear 6800 lubricants are supreme performance heavy-duty gear oils primarily designed for all kinds of enclosed gearing as well as plain and rolling element bearings. They are designed to provide outstanding service in terms of equipment protection, oil life, and problem-free operation enabling increased customer productivity. The synthetic base stocks have inherently low traction properties that result in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling element bearings. Reduced fluid friction produces lower operating temperatures and improved gear efficiency.

The Mobil SHC Gear 6800 finds application in a wide range of enclosed gear applications, as well as plain and rolling element bearings. Because of the very high viscosities they can meet the lubrication needs of very slow speed and high load/high temperature gears and bearings; they are ideal for situations in which conventional products operate in the boundary regime. There may be situations where a lubricant bath or recirculation system is used to apply the oil.

Advantages and Potential Benefits:

The Mobil SHC Gear 6800 is a leading member of the Mobil SHC brand of products that are world renowned for their innovation and performance. The Mobil SHC 6800 provides benefits not possible with mineral stocks, particularly under extreme high and low temperature operating conditions, and deliver performance features and customer benefits.

1. Outstanding load-carrying and anti-wear properties
2. Very high viscosity grades available, without reduction of properties or performance capability
3. High viscosity index
4. Low traction properties
5. Outstanding thermal/oxidation resistance and long product life
6. Light colour

Applications:

Application Considerations: Mobil SHC Gear 6800oil is recommended for all types of enclosed steel-on-steel gear drives. It is suitable for both circulation and splash lubrication systems. It is particularly recommended for gear sets operating under heavy or shock loads and low speeds where boundary lubrication may prevail.

Mobil SHC Gear 6800 – Industrial enclosed spur, helical and bevel gears, especially slow speed, and/or high load unitsMobil SHC Gear 6800 – Plain and rolling element bearings, especially in slow speed, and/or high applicationsMobil SHC Gear 6800 – Railroad DC Traction Motor drivesMobil SHC Gear 6800 – Certain open gear applications such as oiling pinions or specially designed circulation systems

About Mobilgear 600 XP 100

Mobilgear 600 XP lubricants are extra high performance gear oils with outstanding extreme pressure characteristics and load-carrying properties. They are intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. They are also designed to stay ahead of the changing needs of gearbox technology. An increase in power density increases demands on gear oils. Mobilgear 600 XP Series’ balanced formulation provides maximum wear and corrosion protection while maintaining compatibility with common gearbox seal materials. Mobilgear 600 XP helps maintain gearbox seal integrity to prevent oil leaks and contamination.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity, especially critical for inaccessible gearboxes
• Improved bearing life increases productivity and reduces replacement costs
• Outstanding seal compatibility reduces leakage, oil consumption and contamination ingress reduce maintenance, extend gearbox reliability and increase productivity
• Optimum performance of water-contaminated applications or equipment prone to oil foaming

Applications:

• Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• Non-gear applications include shaft couplings, screws and heavily loaded plain and rolling contact bearings operating at slow speeds

About Mobilgear 600 XP 150

Mobilgear 600 XP lubricants are extra high performance gear oils with outstanding extreme pressure characteristics and load-carrying properties. They are intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. They are also designed to stay ahead of the changing needs of gearbox technology. An increase in power density increases demands on gear oils. Mobilgear 600 XP Series’ balanced formulation provides maximum wear and corrosion protection while maintaining compatibility with common gearbox seal materials. Mobilgear 600 XP helps maintain gearbox seal integrity to prevent oil leaks and contamination.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity, especially critical for inaccessible gearboxes
• Improved bearing life increases productivity and reduces replacement costs
• Outstanding seal compatibility reduces leakage, oil consumption and contamination ingress reduce maintenance, extend gearbox reliability and increase productivity
• Optimum performance of water-contaminated applications or equipment prone to oil foaming

Applications:

• Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• Non-gear applications include shaft couplings, screws and heavily loaded plain and rolling contact bearings operating at slow speeds

About Mobilgear 600 XP 220

Mobilgear 600 XP lubricants are extra high performance gear oils with outstanding extreme pressure characteristics and load-carrying properties. They are intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. They are also designed to stay ahead of the changing needs of gearbox technology. An increase in power density increases demands on gear oils. Mobilgear 600 XP Series’ balanced formulation provides maximum wear and corrosion protection while maintaining compatibility with common gearbox seal materials. Mobilgear 600 XP helps maintain gearbox seal integrity to prevent oil leaks and contamination.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity, especially critical for inaccessible gearboxes
• Improved bearing life increases productivity and reduces replacement costs
• Outstanding seal compatibility reduces leakage, oil consumption and contamination ingress reduce maintenance, extend gearbox reliability and increase productivity
• Optimum performance of water-contaminated applications or equipment prone to oil foaming

Applications:

• Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• Non-gear applications include shaft couplings, screws and heavily loaded plain and rolling contact bearings operating at slow speeds

About Mobilgear 600 XP 320

Mobilgear 600 XP lubricants are extra high performance gear oils with outstanding extreme pressure characteristics and load-carrying properties. They are intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. They are also designed to stay ahead of the changing needs of gearbox technology. An increase in power density increases demands on gear oils. Mobilgear 600 XP Series’ balanced formulation provides maximum wear and corrosion protection while maintaining compatibility with common gearbox seal materials. Mobilgear 600 XP helps maintain gearbox seal integrity to prevent oil leaks and contamination.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity, especially critical for inaccessible gearboxes
• Improved bearing life increases productivity and reduces replacement costs
• Outstanding seal compatibility reduces leakage, oil consumption and contamination ingress reduce maintenance, extend gearbox reliability and increase productivity
• Optimum performance of water-contaminated applications or equipment prone to oil foaming

Applications:

• Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• Non-gear applications include shaft couplings, screws and heavily loaded plain and rolling contact bearings operating at slow speeds

About Mobilgear 600 XP 460

Mobilgear 600 XP lubricants are extra high performance gear oils with outstanding extreme pressure characteristics and load-carrying properties. They are intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. They are also designed to stay ahead of the changing needs of gearbox technology. An increase in power density increases demands on gear oils. Mobilgear 600 XP Series’ balanced formulation provides maximum wear and corrosion protection while maintaining compatibility with common gearbox seal materials. Mobilgear 600 XP helps maintain gearbox seal integrity to prevent oil leaks and contamination.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity, especially critical for inaccessible gearboxes
• Improved bearing life increases productivity and reduces replacement costs
• Outstanding seal compatibility reduces leakage, oil consumption and contamination ingress reduce maintenance, extend gearbox reliability and increase productivity
• Optimum performance of water-contaminated applications or equipment prone to oil foaming

Applications:

• Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• Non-gear applications include shaft couplings, screws and heavily loaded plain and rolling contact bearings operating at slow speeds

About Mobilgear 600 XP 68

Mobilgear 600 XP lubricants are extra high performance gear oils with outstanding extreme pressure characteristics and load-carrying properties. They are intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. They are also designed to stay ahead of the changing needs of gearbox technology. An increase in power density increases demands on gear oils. Mobilgear 600 XP Series’ balanced formulation provides maximum wear and corrosion protection while maintaining compatibility with common gearbox seal materials. Mobilgear 600 XP helps maintain gearbox seal integrity to prevent oil leaks and contamination.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity, especially critical for inaccessible gearboxes
• Improved bearing life increases productivity and reduces replacement costs
• Outstanding seal compatibility reduces leakage, oil consumption and contamination ingress reduce maintenance, extend gearbox reliability and increase productivity
• Optimum performance of water-contaminated applications or equipment prone to oil foaming

Applications:

• Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• Non-gear applications include shaft couplings, screws and heavily loaded plain and rolling contact bearings operating at slow speeds

About Mobilgear 600 XP 680

Mobilgear 600 XP lubricants are extra high performance gear oils with outstanding extreme pressure characteristics and load-carrying properties. They are intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. They are also designed to stay ahead of the changing needs of gearbox technology. An increase in power density increases demands on gear oils. Mobilgear 600 XP Series’ balanced formulation provides maximum wear and corrosion protection while maintaining compatibility with common gearbox seal materials. Mobilgear 600 XP helps maintain gearbox seal integrity to prevent oil leaks and contamination.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity, especially critical for inaccessible gearboxes
• Improved bearing life increases productivity and reduces replacement costs
• Outstanding seal compatibility reduces leakage, oil consumption and contamination ingress reduce maintenance, extend gearbox reliability and increase productivity
• Optimum performance of water-contaminated applications or equipment prone to oil foaming

Applications:

• Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• Non-gear applications include shaft couplings, screws and heavily loaded plain and rolling contact bearings operating at slow speeds

About Mobilgear SHC 1000

The Mobilgear SHC lubricants are supreme performance heavy duty gear oils designed to provide outstanding equipment protection, oil life, and problem-free operation to increase productivity. The combination of a naturally high viscosity index and a unique additive system provides outstanding performance under severe high and low temperature operating conditions. They have outstanding EP properties and resistance to shock loading. Mobilgear SHC covers a very wide viscosity range, from ISO VG 220 to 6800. It is suitable for a wide range of enclosed gear applications as well as plain and rolling element bearings. Because of the very high viscosities available, this family of oils can meet the lubrication needs of very slow speed and high load/high temperature gears and bearings.

Mobilgear SHC lubricants are the products of choice for many OEMs and customers worldwide based on their wide application range and superb performance in tough situations.

Advantages and Potential Benefits:

• Extended gear service intervals reduce maintenance costs
• Excellent protection of gears and bearings even at slow speeds, high loads and high temperatures
• Optimum operating efficiency over a wide temperature range, particularly at low temperatures, reduces operating costs
• Lower consumption reduces product and change-out costs
• Very high viscosity grades available, without reduction of properties or performance capability

Applications:

• Industrial enclosed spur, helical and bevel gear drives, especially heavy-duty applications found in mining, chemical processing, metals and paper sectors
• Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers

About Mobilgear SHC 1500

The Mobilgear SHC lubricants are supreme performance heavy duty gear oils designed to provide outstanding equipment protection, oil life, and problem-free operation to increase productivity. The combination of a naturally high viscosity index and a unique additive system provides outstanding performance under severe high and low temperature operating conditions. They have outstanding EP properties and resistance to shock loading. Mobilgear SHC covers a very wide viscosity range, from ISO VG 220 to 6800. It is suitable for a wide range of enclosed gear applications as well as plain and rolling element bearings. Because of the very high viscosities available, this family of oils can meet the lubrication needs of very slow speed and high load/high temperature gears and bearings.

Mobilgear SHC lubricants are the products of choice for many OEMs and customers worldwide based on their wide application range and superb performance in tough situations.

Advantages and Potential Benefits:

• Extended gear service intervals reduce maintenance costs
• Excellent protection of gears and bearings even at slow speeds, high loads and high temperatures
• Optimum operating efficiency over a wide temperature range, particularly at low temperatures, reduces operating costs
• Lower consumption reduces product and change-out costs
• Very high viscosity grades available, without reduction of properties or performance capability

Applications:

• Industrial enclosed spur, helical and bevel gear drives, especially heavy-duty applications found in mining, chemical processing, metals and paper sectors
• Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers

About Mobilgear SHC 22M

The Mobilgear SHC lubricants are supreme performance heavy duty gear oils designed to provide outstanding equipment protection, oil life, and problem-free operation to increase productivity. The combination of a naturally high viscosity index and a unique additive system provides outstanding performance under severe high and low temperature operating conditions. They have outstanding EP properties and resistance to shock loading. Mobilgear SHC covers a very wide viscosity range, from ISO VG 220 to 6800. It is suitable for a wide range of enclosed gear applications as well as plain and rolling element bearings. Because of the very high viscosities available, this family of oils can meet the lubrication needs of very slow speed and high load/high temperature gears and bearings.

Mobilgear SHC lubricants are the products of choice for many OEMs and customers worldwide based on their wide application range and superb performance in tough situations.

Advantages and Potential Benefits:

• Extended gear service intervals reduce maintenance costs
• Excellent protection of gears and bearings even at slow speeds, high loads and high temperatures
• Optimum operating efficiency over a wide temperature range, particularly at low temperatures, reduces operating costs
• Lower consumption reduces product and change-out costs
• Very high viscosity grades available, without reduction of properties or performance capability

Applications:

• Mobilgear SHC 220 to 1500:
• Industrial enclosed spur, helical and bevel gear drives, especially heavy-duty applications found in mining, chemical processing, metals and paper sectors
• Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• Mobilgear SHC 3200 and 6800:
• Industrial enclosed spur, helical and bevel gears, especially slow speed, and/or high load units
• Plain and rolling element bearings, especially in slow speed, and/or high load applications
• Railroad DC traction motor drives
• Certain open gear applications such as oiling pinions or specially designed circulation systems

About Mobilgear SHC 3200

The Mobilgear SHC lubricants are supreme performance heavy duty gear oils designed to provide outstanding equipment protection, oil life, and problem-free operation to increase productivity. The combination of a naturally high viscosity index and a unique additive system provides outstanding performance under severe high and low temperature operating conditions. They have outstanding EP properties and resistance to shock loading. Mobilgear SHC covers a very wide viscosity range, from ISO VG 220 to 6800. It is suitable for a wide range of enclosed gear applications as well as plain and rolling element bearings. Because of the very high viscosities available, this family of oils can meet the lubrication needs of very slow speed and high load/high temperature gears and bearings.

Mobilgear SHC lubricants are the products of choice for many OEMs and customers worldwide based on their wide application range and superb performance in tough situations.

Advantages and Potential Benefits:

• Extended gear service intervals reduce maintenance costs
• Excellent protection of gears and bearings even at slow speeds, high loads and high temperatures
• Optimum operating efficiency over a wide temperature range, particularly at low temperatures, reduces operating costs
• Lower consumption reduces product and change-out costs
• Very high viscosity grades available, without reduction of properties or performance capability

Applications:

• Mobilgear SHC 220 to 1500:
• Industrial enclosed spur, helical and bevel gear drives, especially heavy-duty applications found in mining, chemical processing, metals and paper sectors
• Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• Mobilgear SHC 3200 and 6800:
• Industrial enclosed spur, helical and bevel gears, especially slow speed, and/or high load units
• Plain and rolling element bearings, especially in slow speed, and/or high load applications
• Railroad DC traction motor drives
• Certain open gear applications such as oiling pinions or specially designed circulation systems

About Mobilgear SHC 46M

The Mobilgear SHC lubricants are supreme performance heavy duty gear oils designed to provide outstanding equipment protection, oil life, and problem-free operation to increase productivity. The combination of a naturally high viscosity index and a unique additive system provides outstanding performance under severe high and low temperature operating conditions. They have outstanding EP properties and resistance to shock loading. Mobilgear SHC covers a very wide viscosity range, from ISO VG 220 to 6800. It is suitable for a wide range of enclosed gear applications as well as plain and rolling element bearings. Because of the very high viscosities available, this family of oils can meet the lubrication needs of very slow speed and high load/high temperature gears and bearings.

Mobilgear SHC lubricants are the products of choice for many OEMs and customers worldwide based on their wide application range and superb performance in tough situations.

Advantages and Potential Benefits:

• Extended gear service intervals reduce maintenance costs
• Excellent protection of gears and bearings even at slow speeds, high loads and high temperatures
• Optimum operating efficiency over a wide temperature range, particularly at low temperatures, reduces operating costs
• Lower consumption reduces product and change-out costs
• Very high viscosity grades available, without reduction of properties or performance capability

Applications:

• Mobilgear SHC 220 to 1500:
• Industrial enclosed spur, helical and bevel gear drives, especially heavy-duty applications found in mining, chemical processing, metals and paper sectors
• Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• Mobilgear SHC 3200 and 6800:
• Industrial enclosed spur, helical and bevel gears, especially slow speed, and/or high load units
• Plain and rolling element bearings, especially in slow speed, and/or high load applications
• Railroad DC traction motor drives
• Certain open gear applications such as oiling pinions or specially designed circulation systems

About Mobilgear SHC 6800

The Mobilgear SHC lubricants are supreme performance heavy duty gear oils designed to provide outstanding equipment protection, oil life, and problem-free operation to increase productivity. The combination of a naturally high viscosity index and a unique additive system provides outstanding performance under severe high and low temperature operating conditions. They have outstanding EP properties and resistance to shock loading. Mobilgear SHC covers a very wide viscosity range, from ISO VG 220 to 6800. It is suitable for a wide range of enclosed gear applications as well as plain and rolling element bearings. Because of the very high viscosities available, this family of oils can meet the lubrication needs of very slow speed and high load/high temperature gears and bearings.

Mobilgear SHC lubricants are the products of choice for many OEMs and customers worldwide based on their wide application range and superb performance in tough situations.

Advantages and Potential Benefits:

• Extended gear service intervals reduce maintenance costs
• Excellent protection of gears and bearings even at slow speeds, high loads and high temperatures
• Optimum operating efficiency over a wide temperature range, particularly at low temperatures, reduces operating costs
• Lower consumption reduces product and change-out costs
• Very high viscosity grades available, without reduction of properties or performance capability

Applications:

• Mobilgear SHC 220 to 1500:
• Industrial enclosed spur, helical and bevel gear drives, especially heavy-duty applications found in mining, chemical processing, metals and paper sectors
• Industrial gearing for conveyers, agitators, dryers, extruders, fans, mixers, presses, pulpers, pumps (including oil well pumps), screens, extruders and other heavy duty applications
• Marine gearing including main propulsion, centrifuges, deck machinery such as winches, windlasses, cranes, turning gears, pumps, elevators and rudder carriers
• Mobilgear SHC 3200 and 6800:
• Industrial enclosed spur, helical and bevel gears, especially slow speed, and/or high load units
• Plain and rolling element bearings, especially in slow speed, and/or high load applications
• Railroad DC traction motor drives
• Certain open gear applications such as oiling pinions or specially designed circulation systems

About Mobilgear SHC XMP 320

Mobilgear SHC XMP supreme performance, fully synthetic industrial gear lubricants are designed to provide optimum equipment protection and oil life even under extreme conditions. Mobil’s polyalphaolefin (PAO) technology gives it its exceptional oxidation resistance and thermal properties, naturally high viscosity index, excellent low temperature fluidity and absence of undesirable compounds that are often found in mineral oils. Mobilgear SHC XMP lubricants are recommended for enclosed industrial gear drives, including steel-on-steel spur, helical, and bevel gears. It is especially recommended for applications that may be subject to micropitting such as heavily loaded gearboxes with surface-hardened tooth metallurgies.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity, especially critical for inaccessible gearboxes
• Long gear and bearin

About Mobilgear SHC XMP 460

Mobilgear SHC XMP supreme performance, fully synthetic industrial gear lubricants are designed to provide optimum equipment protection and oil life even under extreme conditions. Mobil’s polyalphaolefin (PAO) technology gives it its exceptional oxidation resistance and thermal properties, naturally high viscosity index, excellent low temperature fluidity and absence of undesirable compounds that are often found in mineral oils. Mobilgear SHC XMP lubricants are recommended for enclosed industrial gear drives, including steel-on-steel spur, helical, and bevel gears. It is especially recommended for applications that may be subject to micropitting such as heavily loaded gearboxes with surface-hardened tooth metallurgies.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity, especially critical for inaccessible gearboxes
• Long gear and bearing life in enclosed gear drives operating under extreme conditions of load, speed and temperature
• Extended gear service intervals reduces maintenance costs
• Lower operating temperatures
• Optimum performance of water-contaminated applications, even at high temperatures
• Reduced energy consumption

Applications:

• Wind turbines, especially highly loaded and shock loaded units, remotely located units and extreme temperature environments
• Plastic extruder gearboxes
• Modern, highly loaded gearboxes used in the paper, steel, oil, textile, lumber and cement industries where gear protection and optimum oil life are required

About Mobilgear XMP 460

Mobilgear XMP 460 is an extra high performance industrial gear oil designed to provide optimum equipment protection and oil life even under extreme conditions. Mobilgear XMP Series are based on high quality mineral base stocks and an advanced proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing. It also provides a high level of resistance against micropitting fatigue. Mobilgear XMP products offer outstanding rust and corrosion protection compared to conventional gear oils, including seawater and acidic water protection.

They show no tendency to plug fine filters when wet and are compatible with ferrous and nonferrous metals, even at elevated temperatures.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Long gear and bearing life in enclosed gear drives operating under extreme conditions of load, speed and temperature
• Extended gear service intervals reduce maintenance costs
• Optimum performance of water-contaminated applications, even at high temperatures

Applications:

• Wind turbines
• Plastic extruder gearboxes
• Gearboxes found in the paper, steel, oil, textile, lumber and cement industries

About Mobiltac 275 NC

Mobiltac 375 NC and 275 NC are extra high performance non-leaded, diluent-type, heavy-bodied open gear lubricants designed for a wide variety of open gear and mining applications. They contain a non-chlorinated, volatile solvent that ensures fluidity during application, even at low temperatures.

Once applied, the diluent evaporates and the lubricants take on a flexible, adhesive, high strength consistency that is maintained throughout their service life. Mobiltac 375 NC and 275 NC adhere strongly to gear teeth and other machine elements to resist excessive throw-off. They provide a wear-resistant, viscous, continuous film that lubricates well under boundary conditions.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Extended gear service intervals reduce maintenance costs
• Reliable flow and lubrication for easy startup, even at low temperatures
• Optimum performance of water-contaminated applications
• Excellent protection at low temperatures
• Easy to clean with rags and conventional solvents or cleaning fluids

Applications:

• Mobiltac 375 NC: Contains a high-viscosity base oil and is recommended for the lubrication of highly loaded open gears, including those that operate at high temperatures. For example, ring gears on cement kilns and large gears on ore-processing mills
• Mobiltac 275 NC: Mine and quarry shovels, draglines, and related equipment; also open gears, racks and pinions, swing gears, booms and sticks
• Minimum operating temperature for Mobiltac is -1ºC for 375 NC and -9ºC for 275 NC

About Mobiltac 375 NC

Mobiltac 375 NC and 275 NC are extra high performance non-leaded, diluent-type, heavy-bodied open gear lubricants designed for a wide variety of open gear and mining applications. They contain a non-chlorinated, volatile solvent that ensures fluidity during application, even at low temperatures.

Once applied, the diluent evaporates and the lubricants take on a flexible, adhesive, high strength consistency that is maintained throughout their service life. Mobiltac 375 NC and 275 NC adhere strongly to gear teeth and other machine elements to resist excessive throw-off. They provide a wear-resistant, viscous, continuous film that lubricates well under boundary conditions.

Advantages and Potential Benefits:

• Long service life reduces replacement costs, minimises downtime and increases productivity
• Extended gear service intervals reduce maintenance costs
• Reliable flow and lubrication for easy startup, even at low temperatures
• Optimum performance of water-contaminated applications
• Excellent protection at low temperatures
• Easy to clean with rags and conventional solvents or cleaning fluids

Applications:

• Mobiltac 375 NC: Contains a high-viscosity base oil and is recommended for the lubrication of highly loaded open gears, including those that operate at high temperatures. For example, ring gears on cement kilns and large gears on ore-processing mills
• Mobiltac 275 NC: Mine and quarry shovels, draglines, and related equipment; also open gears, racks and pinions, swing gears, booms and sticks
• Minimum operating temperature for Mobiltac is -1ºC for 375 NC and -9ºC for 275 NC